I've attached the fusion 360 file as well as the resulting gcode. It seems like I need to tell the machine to use the CNC probed position as the material start position but I'm unsure how to do so, or why that wouldn't be handled by post processing with the carbide3D config. I was hoping Fusion could work out where the material was and shorten the path further up the part. So when it starts at the top it cuts a lot of air where there is no material. I picked two geometry lines on the bottom face of the slot but there is a sloping side to the block. I've tried moving the component to origin in fusion, selecting the material body under the Manufacture Setup for the toolpaths, nothing seems to work. This is a second OP after profiling the part. When creating the gcode through fusion I used the default Carbide3D config, I've also tried a user posted ShapeOKO config and have the same issue.

The issue I'm running into is the CNC is not starting at the home position I set using the xyz touch probe, but rather moving to the front most extent on the Y- axis and beginning to cut where there is no material. I created a design using Fusion 360, generated the gcode and I'm using Carbide Motion as the gcode sender. I'm very new to Fusion 360 and the Shapeoko CNC and am attempting my first 3d project.

Fusion 360 shapeoko